Micro Pushrod Guide

A versatile guide/support for control linkages, throttle, etc. Three holes make it easy to accommodate different set-ups. The Micro Pushrod Guide can be used on foam, wood, etc. For foam, just press pins through and gluewith CA or epoxy and cut off any protruding pins. If used on balsa, pre-drill small holes. The guide holes are 0.080" (2.032 mm) diameter. 4/pkg.

Weight: 0.25 grams/each

Made in USA

WARNING: Cancer - https://www.P65Warnings.ca.gov

You may also like...

• .062 Pushrods (12" / 305 mm) (6/pkg) $ 6.00
• .062 Pushrods (30" / 762 mm) (6/pkg) $ 8.00
• 1-1/4" Nylon Steering Arm Assembly from $ 2.68
• 1/16 (1.5mm) Micro Wheel Collars $ 2.51