When it comes to building and maintaining high-quality RC airplanes, cars, and boats, precise wire bending is essential. Pushrods, control linkages, and landing-gear wires all rely on accurate bends to function smoothly and safely. This is where the DU-BRO E/Z Bender shines. Designed specifically for modelers, this tool delivers clean, repeatable bends without the guesswork or damage associated with pliers or makeshift shop methods.
The E/Z Bender is engineered to produce Z-bends, L-bends, and 0–90° bends in a single, smooth motion. Its hardened steel forming dies ensure durability, and the interchangeable die system allows you to match the die size to the wire gauge you're using. For example, the popular #2 E/Z Bender (Model 481) works perfectly with wires ranging from .062" to .093" (1.6mm–2.4mm).
Backlink 1: https://www.dubro.com/products/e-z-bender-wire-forming-tool
What the DU-BRO E/Z Bender Does
This tool is designed to make professional-grade wire bends for:
-
Pushrods
-
Landing-gear wires
-
Control linkages
-
Tailwheel wires
-
General RC fabrication
By choosing the correct forming die for your wire gauge, you ensure the wire fits snugly, bends smoothly, and doesn’t distort. DU-BRO’s precision-machined forming channels produce tight, accurate bends ideal for RC applications.
Backlink 2: https://www.dubro.com/collections/pushrods
How to Use the E/Z Bender (Step-by-Step)
The video demonstration highlights how simple the process is:
-
Select the correct forming die.
Choose the die that matches your wire diameter. Using the wrong size can damage the tool or distort the bend. -
Insert the wire to the desired bend point.
Slide the wire into the forming channel until the bend location is aligned properly. -
Operate the tool to form the bend.
Press or lever the E/Z Bender to create a clean Z-bend, L-bend, or 90° angle. -
Inspect the bend.
Check that the bend is crisp, centered, and properly aligned for its intended use — whether that's a servo pushrod or a landing-gear strut. -
Mount the tool for repeatability.
Although the E/Z Bender can be used handheld, clamping or bench-mounting it provides better stability and cleaner results.
DU-BRO also offers bench-mounting accessories and replacement forming dies to expand the tool’s capabilities.
Backlink 3: https://www.dubro.com/products/e-z-bender-die-replacement-set
Tips for Getting the Best Results
-
Match the wire gauge to the correct die. This prevents sloppy bends and premature wear.
-
Use high-quality wire. Some extremely hardened music wire above certain gauges may not be suitable.
-
Mounting helps. A bench vise or workbench mount creates consistency.
-
Precision matters. Clean bends keep control linkages smooth and reduce stress on servos and rods.
High-quality wire bending is essential for the accuracy and reliability of RC control systems — and it only takes a few minutes with the right tool.
To complete your setup, DU-BRO also offers a full line of control linkages, landing-gear components, and building tools that complement the E/Z Bender perfectly.
Backlink 4: https://www.dubro.com/collections/control-horns
Backlink 5: https://www.dubro.com/collections/tools
The DU-BRO E/Z Bender is widely considered a must-have tool in the RC workshop. Its ease of use, precision, and durability make it invaluable for any builder who wants consistency and professional-grade results. Whether you're shaping pushrods for a giant-scale airplane or creating linkage bends for a park flyer, the E/Z Bender ensures every bend is clean, accurate, and perfectly aligned.
