Home » DU-BRO 101 » Du-Bro 101 - How to Install DU-BRO RC Airplane Landing Gear Wheel Collars
Du-Bro 101 - How to Install DU-BRO RC Airplane Landing Gear Wheel Collars

Du-Bro 101 - How to Install DU-BRO RC Airplane Landing Gear Wheel Collars

Mastering DU-BRO Wheel Collar Installation for RC Airplanes

Installing landing gear wheel collars correctly is one of the simplest yet most important steps in building or maintaining an RC airplane. Even though these tiny components may seem insignificant, they play a major role in flight safety, ground handling, and long-term durability. In the instructional video “DU-BRO 101 – How to Install DU-BRO RC Airplane Landing Gear Wheel Collars,” DU-BRO provides step-by-step guidance that helps hobbyists achieve a reliable, professional installation every time.

Why Wheel Collars Matter

Wheel collars keep your RC airplane’s wheels securely in place on the axle, preventing wobble, slippage, or dangerous gear failures during takeoff, landing, and taxiing. A properly installed wheel collar:

  • Holds the wheel firmly without excessive friction

  • Reduces wear on the axle

  • Improves directional stability on the ground

  • Enhances overall model reliability

If you’re building a new aircraft or replacing worn hardware, you can explore quality options in our Landing Gear Accessories, Wheel Collars, or Tires & Wheels Collection.

What the Video Demonstrates

The DU-BRO tutorial walks you through the entire installation process, beginning with the tools and parts you’ll need:

  • A DU-BRO wheel collar kit

  • Your landing gear axle

  • A hex key or driver

  • Correct screws or set screws

The video covers how to clean the axle, slide the collar into position, tighten it properly, and verify wheel alignment before your next flight.

If you need tools for the job, check out our Hex Drivers & Ball Wrenches to ensure a secure, damage-free installation.

Step-by-Step Highlights

1. Inspect the Axle and Collar

Clean both parts thoroughly to remove dirt or residue. A clean surface ensures maximum grip and prevents slippage.

2. Position the Collar

Slide the collar onto the axle, leaving just enough room for the wheel to spin freely.

3. Secure the Collar

Tighten the set screw carefully. Avoid over-tightening, which can strip the screw or damage the axle.

4. Verify Wheel Rotation

Spin the wheel by hand. It should rotate smoothly without binding, scraping, or wobbling.

5. Perform a Final Check

Confirm that nothing interferes with wheel movement or landing gear operation.

For replacement parts or upgrades, our Hardware Kits offer organized assortments perfect for the workshop or flying field.

Why Every RC Builder Should Watch This Video

This tutorial is helpful for both beginners and experienced pilots. It explains the process in a clear, visual format that removes guesswork and builds confidence—especially for those flying trainers, sport aircraft, and scale models where landing gear performance is critical.

Pro Tips for Best Results

  • Use a thread-locking compound if recommended to prevent the set screw from loosening due to vibration.

  • Recheck your wheel collars after several flights. High-RPM vibrations can gradually loosen hardware.

  • Keep a maintenance log to track installation dates, aircraft models, and any adjustments made.

You can explore more helpful components in our Control Hook-Ups Collection and General Hardware sections.

Final Thoughts

Wheel collars may be small, but they are essential for safe, reliable flight. DU-BRO’s video makes installation simple, accurate, and repeatable—whether you’re assembling a fresh build or maintaining a well-loved aircraft.

Take a few minutes to watch the tutorial, gather the right tools, and give your RC airplane the high-quality hardware installation it deserves. Fly safe, fly smart, and trust DU-BRO to keep your model performing at its best.

Here is a link to the wheel collars section of our site:

https://www.dubro.com/products/nickel-plated-dura-collars?_pos=1&_sid=1a39e2293&_ss=r